| |
|
Pneumatic Wagon Drill Exporter for Open cast Mines and Underground Mines, Exporter From India |
|
Wagon drill is designed for Open Cast Mines, Sand and Lime Stone Mines & Underground Mines, which is the alternative to mechanization of Hand-Held Drilling, and is design to work on Top Hammer and the Down-the-Hole hammer drilling method & can easily convert the drilling method from top hammer to down-the-hole and vice versa. |
 |
| TH version (Top Hammer) |
| The TH version of is equipped with the robust Pneumatic Top Hammer with rifle bar rotation model VK-12 Pneumatic Drifter, well known for its simplicity and reliability. Suitable for hole sizes from 48 – 76 mm and depth upto 20 – 40 Meters. |
| |
| DTH version (Down-The-Hole Hammer) |
| The DTH version is fitted with powerful piston type rotation motor, Type BBR-4, suitable for Pneumatic 3” and 4” DTH Hammers. Offering a wide selection of drill hole sizes from 85 to 130 mm, and depth upto 40 Meters. |
| |
| Salient Features |
| Hydraulic Hand pump for Boom Lift, Mechanical Jack, Pneumatic Power Steering with Tow Bar for Tramming and easy to shift from hole to hole, available in different lengths of Feed Beam viz : |
 |
Open Cast Mines – 5.1 Mtr long |
|
Sand & Lime stone mines – 4.2 Mtr long |
|
Underground Mines – 2.5 Mtr long |
|
|
|
| |
| Technical Details |
| TH Version (Top hammer) |
| Pneumatic drifter |
VK – 12 |
| Hole Diameter |
48-76 mm |
| Drill Steel |
R32, R38, T38 |
| Drill Steel Length |
1.20 Mtr, 2.50 Mtr, 3 Mtr |
| Air consumption |
400 CFM @ 6 Bar |
|
| |
| DTH Version (Down-The-Hole hammer) |
| Rotation Drive Unit |
Type BBR-4, Thread - API 2 3/8” |
| Hole Diameter |
85-130 mm |
| Drill Tube Diameter |
70 / 76 / 89 mm |
| Drill Tube Length |
1.20 Mtr, 2.50 Mtr, 3 Mtr |
| Max. Operating Pressure |
12 Bar |
| Maximum Torque |
900 Nm |
| Air consumption |
325 CFM @ 10 Bar |
| Suitable Hammer |
Cop 32, Cop 34 / 34 Q, Cop 44 / 44 Q |
|
| |
| Feed and boom |
| Feed type |
Chain drive |
| Feed length, total |
5,430 mm, 4425 mm, 2825 mm |
| Travel length |
3,940 mm, 2200 mm, 1500 mm |
| Feed force |
8 kN (1,800 lbf) |
| Boom type |
Single section |
| Drill control panel |
Side mounted |
|
| |
| Carrier |
| Traction type |
Pneumatic wheel drive |
| Tramming speed, max |
2 km/h (1.3 mph) |
| Traction force, max |
7.8 kN (1,750 lbf) |
| Hill climbing ability1) |
20 degrees |
| Track oscillation |
N/A |
| Ground clearance |
310 mm (1”) |
|
| |
| Transport dimensions |
| Weight |
1,340 kg (2,948 lb) |
| Length, transport position |
5,430 mm (17' 9") |
| Width |
2,100 mm (6' 10") |
| Height |
1,600 mm (5' 3") |
|
| |
|
|
