|
| |
| Pneumatic Cement Injection Pump |
| |
|
Pneumatic Cement Injection Pump for Underground Mines |
|
| |
| The Pneumatic Cement Injection Pump is designed Underground Mines for Cement grouts & Spraying water based Binder, where low volume, but high pressure is required. |
| |
| Salient Features |
| The major attraction of Pump is its portability, light weight, & rugged enough to withstand the normal mines handling, easy to maintain in case of any blockages |
| |
 |
| Applications |
 |
Roof Bolung & Cable Grouting Fully Grouted Bolts & anchors
installed by pregrouting or post injection |
|
Long hole grouting from 3m to 20m, can be injected with
cemetitious or other mixer (water based resins etc) in
ration from 1 : 033 upto 1 : 2 |
|
Ventilation control by spraying on to walls and
prefabricated meshes. |
|
Rock sealing pregrouting Weathering or degradation by
spraying |
|
Injection of Grouts, set props with a modification to
produce high pressure setting up to 500 psi |
|
|
|
| |
| Technical Details |
|
Weight : 22 Kg. For Pump |
|
Dimension : 8” x 24” x 44” ( L x W x H) |
|
Air Consumption : 90-100 cfm @ 70-80 psi |
|
Head Capacity: 3 Meter to 20 Meter |
|
One Valve Operation Control |
|
| |
| Scope of Supply |
| A special grout mixer including 2 No. drums of 75 litres capacity, with mixing blades, air motor and torque multiplying speed reduction gear box |
| |
|
|
| Since approvement are made from time to time, the illustration and specifications are subject to change without notice |
|
|
